For New Customers Switching to the Naturel Spa Product

For Customers Using Bromine, Chlorine or Nature 2

• Follow the Cleaning Your Spa with Citri-Clean Instructions

For Customers Using Baqua Spa

1. Drain the spa
2. Fill spa with municipal water from a clean hose
3. Balance the pH to 7.2 to 7.6
4. Follow the Cleaning Your Spa with Citri-Clean Instructions

If You Have Just Drained Your Spa AND Were NOT using Baqua Spa Previously

Before adding Naturel Spa to your spa, you’ll need to remove the chemical residue in your plumbing. Simply draining the spa will not do this. Follow the procedure below to remove the chemical residue.

1. Fill spa with municipal water from a clean hose
2. Adjust the pH to 7.2 to 7.6
3. Add Citri-Clean to adjust the pH to 6.0
4. Cycle the water (hot or cold) on high to break loose the old chemicals, scale and minerals
5. Follow the Cleaning Your Spa with Citri-Clean Instructions

If Your Spa Has Been Empty for Over Three Months

Before using Naturel Spa, you’ll need to remove the hardened chemical residue from your plumbing.

1. Follow the Every Time You Fill with New Water Instructions
2. After a few weeks, the old chemical residue will start to soften up
3. Follow the Cleaning Your Spa with Citri-Clean Instructions

Any questions, please give us a call at 1-877- 772-2273.